When the Kaiping machine starts continuous pressing,the speed control screw of the feeder should rotate clockwise,and the slider should move slowly,so that we can see whether the slider touches the nylon pad and the length adjustment screw when moving back and forth.Check if the feeding direction is correct before starting up.When the machine speed remains constant and the feed distance needs to be shortened in length,first lift the guide screw to reduce the descent distance of the floating rod,and then rotate the speed control screw clockwise to match the machine speed.Adjust the distance between the rack and the conveyor to the feeder.Adjust the distance based on the stamping speed and the feeding length of the feeder.The leveled material should be able to smoothly enter the feeder and mold.
The utilization rate of Kaiping machines is becoming increasingly common,and it is necessary to choose a suitable operating mode during the construction process.It is an advantage added during use.Approved due to its characteristics,the frequency of use is increasing.Let's take a look at the correct configuration of the Kaiping machine.
Kaiping machine is a common steel plate processing equipment.In order to ensure the quality of the Kaiping board,the equipment needs to meet the standards.It is mainly achieved by loading cars,unwinding machines,tray clamp devices,limit switches,etc.The Kaiping machine is equipped with upper and lower molds,and a push rod that is fixedly connected to the hydraulic cylinder.The hydraulic cylinder body is fixed on a bracket.The upper and lower molds are equipped with independent cooling water channels,and the outlet and inlet of the cooling water channels are respectively located in the upper mold or mold.
The ratio between the radius of at least the first five rollers and the distance between them at the entrance of the opening machine is similar to that of the traditional straightener,and the ratio between the radius of at least the last five rollers and the distance between them is similar to that of the curler,which increases the distance between the middle rollers in the machine.This structure ensures rapid quenching and cooling,as well as avoids the invasion of impurities into the tool or blank,ensuring the surface quality of the tool or blank microstructure and hardness,and avoiding contamination by cooling oil.
Kaiping machine has excellent heat treatment furnaces and intermediate frequency quenching heating furnaces,as well as all roller quenching and tempering equipment.The rollers obtain certain strength,hardness,and comprehensive mechanical properties,as well as good plasticity and toughness.After intermediate frequency quenching treatment,the hard layer of the roller can reach 6 millimeters,which is very beneficial for improving the wear resistance and fatigue strength of the roller and extending its service life.
Language
