The slitting line machine,also known as the slitting unit,is used for slitting and cutting coil materials such as tinplate,galvanized iron,silicon steel sheets,cold-rolled steel strips,stainless steel strips,aluminum strips,and steel strips.
Longitudinal cutting line is a common industrial equipment used for cutting,deburring,or dividing metal sheets,films,and other materials.However,even simple industrial equipment carries certain risks,so it is necessary to establish some operating procedures to ensure the safety of workers.
Here are the operating procedures for longitudinal cutting:
Before operating the longitudinal cutting line,it is necessary to check whether the machine is securely installed,whether the electrical grounding is normal,and confirm that there are no abnormalities before use.
Before operation,it is necessary to carefully study the user manual and related knowledge,and have a comprehensive understanding of the performance,functions,operation,and maintenance of the equipment.
3.Ensure the physical health and emotional stability of the operators,and prevent temporary changes or other disturbances during operation.
4.During the longitudinal cutting operation,the staff must wear labor protection equipment such as hats,protective goggles,protective gloves,etc.
During the longitudinal cutting operation,smoking,lighters,and other behaviors that may cause fires are prohibited on the production site.
When the machine needs to be cleaned or adjusted during operation,the power must be turned off and the plug must be unplugged to avoid accidental movement and injury.
7.It is strictly prohibited to deliver materials to the cutting edge by hand,and it is even more forbidden to insert hands into the machine for work.
8.For operations that require adjusting the cutting edge,the tool must be adjusted when the machine is stopped.Remember not to adjust any part during the work process.
When the machine detects abnormal sounds or vibrations,it is not allowed to change the operation of the machine without authorization.The machine should be stopped immediately and maintenance personnel should be notified for handling.
When the machine is found to be overloaded,it should be stopped in a timely manner,the cutting edge and waste should be cleaned,and the load should be reduced.
11.The operating procedures for longitudinal cutting equipment must be regularly promoted to raise the awareness of operators and ensure their safety.
In short,the above operating procedures for the use of longitudinal cutting lines are the basic standards for enterprises when using this machine.In addition,enterprises should continuously improve and optimize their management systems based on actual situations,and continuously strengthen training and job supervision to prevent accidents and ensure the safety of personnel.
Language
