During the operation of the longitudinal cutting line,the iron core transformer plays a very important role in the entire operation process.The iron core transformer plays an irreplaceable role in both the cutting and rolling process.Let's take a detailed look below.
Longitudinal cutting line is used for unwinding,slitting,and winding metal coils into coils of the desired width,suitable for processing cold-rolled,hot-rolled carbon steel,silicon steel,tinplate,stainless steel,and various surface coated metal materials.
The steps to be completed after the longitudinal cutting of the transformer iron core are as follows:
(1)Clean up the scraps.(2)Make various records.(3)Cleaning tools,high-speed longitudinal cutting line,cleaning the production site.
matters needing attention:
1.After power on,close attention should be paid.If there is any abnormal situation with the equipment,it should be stopped immediately and appropriate measures should be taken.
2.Non staff members are strictly prohibited from approaching operating equipment.
During the operation of the equipment,no one is allowed to cross the rotating sheet material along the longitudinal cutting line.
4.Before each use of the tool,it is necessary to clean the tool and the upper and lower tool shafts,and lubricate them with lubricating oil No.20-25 to avoid affecting the tool end jumping and even scratching the tool shaft.
5.Regularly check all fastening bolts for looseness and take appropriate measures,and lubricate and maintain the equipment according to the prescribed time and frequency.
After the cutting work is completed,the power should be cut off.
7.Uncoiler and rewinder shall not hang materials for a long time.
The above is a detailed explanation of the important role played by iron core transformers in the overall operation of longitudinal shear lines,hoping to be helpful to you.
Editor:Miranda
Language
