In the production process of some products,many things may happen,which is inevitable.However,if we conduct more in-depth research on the problems that may occur with a certain machine before using it,we can avoid many problems.Today,we will bring you some related knowledge about the Kaiping machine.The main method to avoid vibration in Kaiping machine is to eliminate the vibration source and stay away from the resonance zone.
The main operating method is to adjust the operating parameters of each part of the system to make the machine run away from the natural frequency of the system and avoid resonance.Replace the damaged bearings and adjust the balance of all rollers.This weakens and reduces the vibration source that causes the belt conveyor to vibrate.Improving system stiffness can alter the natural frequency of the system and enhance its ability to resist deformation caused by sudden increases in load.The use of a Kaiping machine without vibration results in better performance,so it is also one of the methods to improve work products and efficiency.
With the development of the sheet metal industry,the quality of sheet metal needs to adapt to the contradiction brought about by the current shortage of steel and the increase in the use of high-strength steel.Due to the shortage of steel,sheet metal processing enterprises often cannot obtain the material quality they require,so they need to level the materials to further improve their quality.For high-strength sheets,obtaining good flatness requires higher leveling pressure and updated leveling concepts.During the process of cold rolling with strip material,defects in the rolling mill can also cause the thickness of a certain part of the material cross-section to be lower than elsewhere.Therefore,the thinner part of the material is slightly longer than the thicker part,which creates waves in the longer area.
Language
