What is the operation process of the specialized cutting equipment for high-speed longitudinal cutting of steel coil plates with longitudinal cutting lines to the required width after being powered on? Here is the editor's summary:
1. Ensure that the operators of the longitudinal cutting line debugging are familiar with the operation process, strictly follow the operation process, and have qualification certificates. This also includes operators not keeping long hair, wearing gloves to operate the machine, and tying cuffs tightly with clothing. This is to ensure the reliability of the operator when operating the longitudinal cutting line.
2. When the longitudinal cutting line feeding trolley is feeding, pay attention to the coordination of power and the fixed position of feeding to prevent the raw materials from falling off and injuring the feet. At the same time, it is necessary to ensure the accurate position of the metal material on the unwinding machine.
3. The longitudinal cutting line shall not be randomly knocked on the control door, and the longitudinal cutting machine shall not touch the transmission part with the body, hands, or heads. When visually observing the operation, do not place your head too close to the material and drum; Do not lean your body against any part of the machine; At the same time, during the operation, the longitudinal cutting line must not be touched by hand on the drum;
4. When unloading, pay attention to the unloading arm pulley to prevent the unloading arm and winding shaft from falling off and injuring the feet.
The longitudinal cutting line cuts the metal coil into strips of various widths, and then harvests these strips into small rolls for the next process. It is equipment for cutting metal strips in industries such as transformers and motors.
Editor: Nancy
Language
