Longitudinal cutting wire is a commonly used electrical equipment for cutting ropes,cables,wires,etc.It is widely used in construction sites,power industry,communication engineering and other fields.However,there are certain safety risks associated with the use of longitudinal cutting wires.In order to ensure the safety of personnel and the normal operation of equipment,it is necessary to develop a safety operating procedure for longitudinal cutting wires.The following will provide a detailed introduction to the safety operation procedures for longitudinal cutting lines to ensure the safety of workers.
1、Preparation work before equipment inspection and operation
1.Equipment review:Before using the longitudinal cutting line,the staff must carefully inspect the appearance and functionality of the equipment for completeness.If any damage or problem is found,it must be immediately reported to the maintenance department and must not be used without authorization.
2.Preparation of work area:Ensure that the work area is clean,tidy,and free of debris.Remove items that may cause slipping,tripping,or other safety risks
3.Determine safety distance:Determine the safety distance based on the usage of the longitudinal cutting line.Generally,non operators should maintain a distance of at least 1 meter from the longitudinal cutting line.
4.Wear personal protective equipment:Operators must wear personal protective equipment that meets safety standards,including helmets,goggles,protective gloves,and non slip shoes.
2、Key points of longitudinal cutting line operation
1.Correctly insert the power plug:Before using the longitudinal cutting wire,ensure that the power plug is correctly inserted and tighten the connecting nut to prevent loosening.
2.Confirm switch operation:Before starting to use the longitudinal cutting wire,ensure that the switch is in the off state.When switching the switch,the operator must hold the insulated handle with their hand to ensure safety.
3.Operation skills for longitudinal cutting:When operating longitudinal cutting,ropes,cables,and other items should be fixed to ensure that they do not shake or slide.Only after ensuring that the item is fixed can it be prepared for cutting.At the same time,when cutting,it is necessary to apply even force to avoid excessive or insufficient force,in order to prevent damage to the equipment.
3、Safety precautions
1.Prevent overload:The longitudinal cutting wire may overheat due to excessive load during operation.Therefore,during use,attention should be paid to observing whether the equipment is heating up to ensure normal operation and prevent overheating.
2.Preventing electric shock:The longitudinal cutting wire is an electric device,so attention must be paid to preventing electric shock when using it.Operators should keep their hands dry and should not place the equipment in areas with water or moisture.
3.Properly store the longitudinal cutting thread:The longitudinal cutting thread should be properly stored after use.It should be placed in a dry and ventilated place,away from sources of fire and flammable materials.When not in use,the plug should be turned off and the power should be disconnected.
Language
